Did you get the lighted Peep’s lights from Dollar Tree? Do you know what you will do with them? Well here’s a super idea! Take a peep 🙂
Materials:
1.) Bunny String Lights
2.)11×14 Frame ( I used the cardboard backing
3.)Moss
4.)White acrylic paint
5.) Wood Dowels (3 total)
6.)Hot Glue and paint for the back ground (acrylic, or Spray Paint)
Start by pulling the lights off the peeps let me tell you it’s really easy.
I placed my peeps on my cardboard and marked near the opening hole and used an exacto knife to make the hole, you can use scissors.
Measure your dowels to the desired length you want, these are the lengths I used.
Paint your dowels using white paint.
This step is optional on painting you can paint it however you desire I used spray paint. But you can use acrylic paint and create your wonderful background.
Once it’s all dried then insert the lights from the back so that’s you reattach the bunny peeps.
Using hot glue glue the peep onto the background as close as you can to the hole.
You do have to pull the wire as far as you can to hide a bit of the wire.
Next, simply glue the painted dowels under the peep to start creating the “Peep-sickle”.
This is turning out pretty cool! Definitely very creative!
To finish it off add the moss to the bottom to hide the dowel cut and create your field of Peep-scicles.
Don’t forget to glue the battery pack to the backside of the cardboard and add the batteries 🙂
Using that same white paint add a couple of clouds to finish it off.
No light it up! This project will have two looks.
1.) Lit up
2.) Non-lit
Enjoy and share with friends and family.
Leave a Reply